Leading SatCom Distributor in the MEA Region

| KEY SPECIFICATIONS | |
|---|---|
| Band | Ku-Band |
| Input frequency band 1 | 10.70 – 11.70 GHz |
| Input frequency band 2 | 11.70 – 12.75 GHz |
| LO frequency 1 | 9.75 GHz |
| LO frequency 2 | 10.60 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| Noise figure max | 0.9 dB |
| Noise figure typ | 0.8 dB |
| Number of onboard LOs | Dual-Band |
| Output frequency band 1 | 950 – 1950 MHz |
| Output frequency band 2 | 1100 – 2150 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| Control signal 1 | 13V / No Tone |
| Control signal 2 | 18V / No Tone |
| Conversion gain max | 65 dB |
| Conversion gain min | 55 dB |
| Conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| Input VSWR | 2.3 : 1 max. |
| Output P1dB | + 5 dBm min. |
| Output VSWR | 2.3 : 1 max. |
| Phase noise 1kHz offset max | -70 dBc/Hz |
| Phase noise 10kHz offset max | -80 dBc/Hz |
| Phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Current consumption | 350 mA |
| Power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| Temperature operational | -40°C to +60°C |
| Temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| Product height | 42 mm |
| Product length | 128 mm |
| Product weight | 0.4 kg |
| Product width | 60 mm |
| Band | Ku-Band |
|---|---|
| Frequency Band | 10.70 ~ 11.70 GHz, 11.70 ~ 12.75 GHz |