Description

The CDMER–625A is the Environmentally Resistant (ER) version of the CDM–625A. It offers added protection in more aggressive operating environments that have a higher concentration of dust, sand and salt. The ER version uses an application of Urethane Conformal Coating (CC) and critical interface protective covers for enhanced protection against dust, sand and salt. Special protective Conformal Coating and protective covers have been designed to ensure that the CDMER–
625A meets MIL–STD–810G requirements including Method 510 Procedure I (Blowing Dust), Method 510 Procedure II (Blowing Sand) and Method 509 (Salt Fog). Both the CC and protective connector covers are non–nutrient fungal growth materials. The ER version also provides an extended operating temperature range of 0 to 60º C. The ER version is not designed to be used in an un–controlled environment or outdoor application. The ER version carries the same two year standard warranty as other Comtech EF Data products.

CDM–625A Advanced Satellite Modem builds on our legacy of providing the most efficient and reliable satellite modems. With support for VersaFEC® Forward Error Correction (FEC), the revolutionary DoubleTalk Carrier–in–Carrier bandwidth compression, additional rolloffs and advanced packet processing, the CDM–625A provides significant savings under all conditions. This combination of advanced technologies enables multi–dimensional optimization, allowing satellite communications users to:

• Minimize operating expenses (OPEX)
• Maximize throughput without using additional transponder resources
• Maximize availability (margin) without using additional transponder resources
• Minimize capital expenses (CAPEX) by allowing a smaller BUC/HPA and/or antenna
• Or, a combination to meet specific business needs

FEATURES

• Environmentally Resistant (ER)
• DoubleTalk Carrier–in–Carrier bandwidth compression
• Carrier–in–Carrier Automatic Power Control
• VersaFEC–2 High Performance LDPC with Adaptive Coding and Modulation (ACM), Short Block and Long Block
• VersaFEC FEC with Adaptive Coding and Modulation (ACM)
• 5%, 10%, 15%, 20%, 25% and 35% Filter Rolloff
• Packet Processor with header compression, payload compression, advanced Quality of Service (QoS) and Managed Switch Mode with VLAN support
• Integrated 4–port managed Ethernet switch with VLAN and QoS
• Jumbo frame support
• Dual Band Capability: 70/140 MHz and extended L–Band (950 – 2250 MHz) in same unit
• Data Rate: 18 kbps to 25 Mbps
• Symbol Rate: 18 ksps to 12.5 Msps
• Modulation: BPSK, QPSK/OQPSK, 8PSK/8–QAM/8–ARY, 16–QAM/16–ARY, 32–ARY
• FEC: Viterbi, Sequential, Concatenated Reed Solomon, TCM, Turbo Product Code (TPC) (IESS–315 Compliant), LDPC Code, VersaFEC (low–latency LDPC) and VersaFEC–2 (high-performance LDPC)
• Widest Range of data interfaces: EIA–422/530, V.35, G.703 T1, G.703 E1, G.703 T2, G.703 E2, Quad G.703 E1, ASI, LVDS, HSSI, 4–port 10/100Base–T Ethernet
• IEEE 1588v2 Precision Time Protocol
• Sub Mux to multiplex IP/Ethernet traffic with serial or G.703 traffic
• Drop & insert for T1/E1
• Enhanced D&I++ for single T1/E1 & quad E1
• Management: 10/100Base–T Ethernet with SNMP, Distant End SNMP Proxy, HTTP, Telnet and EIA–232/EIA–485
• RADIUS Client
• Carrier ID using MetaCarrier® Technology
• Embedded Distant–end Monitor and Control (EDMAC)
• Automatic Uplink Power Control (AUPC)
• Engineering Service Channel (ESC/ESC++)
• Standard high–stability internal reference (± 6 x 10–8)
• 5–tap Adaptive Equalizer
• L–Band TX: 10 MHz reference for BUC, FSK communications and optional BUC power supply
• L–Band RX: 10 MHz reference and LNB power supply
• L–Band: Advanced FSK for LPOD M&C
• 1:1 and 1:10 redundancy switches available
• Backwards compatible with CDM–625